Answers: you can make your own manometer
you need
12 foot of 1/8 ID clear plastic tubing
1 wooden yard stick
2 wire ties
tie rap the tubing to the courtyard stick centered, leaving both ends
fill the tubing near oil up to the 26" or 27" mark
hook up both ends to the vacuum lines on the carb or the injectors
If you " DON'T " hook up both lines when you start the engine it will suck the grease into ur engine.
I did this on my FZ6 and the engine runs as smooth as butter
if your talking about syncing the carbs its not that much in the region of 1 hours labor
More Auto Questions and Answers...
This article contents is post by this website user, AutoQnA.com doesn't promise its accuracy.