i have 4 lights on my boat.2 within the front of boat and 2 in the put a bet on.both front are connected to one wire.same next to the back. so very soon theres one wire connecting adjectives lights.im wonting to put a on/fss switch in.the switch have to connectors in the rear legs of it.im guessing one positive one negative.but doesnt read out postive are neg on it.i connected the light lead to one connector and ran a cable from there two the positive on battery-operated.i took a wire for the ground are refusal and connected one in to the boat and the other to the other connector on fund of the on/off switch.then run a wire from it to the refusal on battery.when i touch the cynical to battery i grasp a big spark.when i turn the switch off and connect it to the cynical the lights come on.what am i doing wrong here.just trying to pinch the lights and connect them to a on off switch so i dont enjoy to keep rigging the wires to the freestyle.i had it working when i have the switch in a diffent spot but dont remmber how it be set up.??
Answers: You do not connect a ground wire to the switch! Thats why you are getting a spark. All lights draw from a ground connection direct to the mobile (you can tie them all to like wire connection) not thru a switch. The switch get a positive lead to it from the battery-operated and then a lead is run from the switch to provide current to the lights. All 12 volt systems use at least 2 wires on a boat, one for positive and one for gloomy.
On Aluminum Boats some people will connect ground to the boat and run one Hot lead to lights. This may be what you have I not sure. The switch individual need a Hot Wire. Depending how it switch, you can enjoy all lights come on or a short time ago the Stern white light etc.
More Auto Questions and Answers...
I've be wanting a houseboat and it seem the single ones within my price inventory are ancient!?
In boat ranking writ... Who comes subsequent after the boss? similar to on boats such as the titanic?
I enjoy a 17 foot carloina skiff near a 50 horse yamaha and it is slow but it didn't use to be. any suggestions
Western system epoxy?
My dad's 40HP mercury's trim does not work. The switch seem OK. It clicks and the trim thud seem usual.
Whats the best route to sink a article boat?
This article contents is post by this website user, AutoQnA.com doesn't promise its accuracy.