The CEL is flashing code 35 which according to my guide shows a problem with the EVAP purge spout curcuit.
I have cleared the code, consequently after a short drive the CEL will come on again. It seems to fluffy back up after I hold turned the car bad, then restarted it.
Any accepted wisdom on how to fix this problem.
Answers: It's a defective purge control soleinod valve. It's located on the intake various, has a few vacum lines and an electrical device on it, I believe the connector is blue or brown. When you buy a bright one, look under the right side of the intake and contest the part beside the new one to locate it, it is mounted next to a 10mm bolt.
It's either the evap stopcock itself or the gas cap isn't tight plenty.
More Auto Questions and Answers...
This article contents is post by this website user, AutoQnA.com doesn't promise its accuracy.