Answers: Are you infallible you are arming the alarm ? Many alarms require you to arm it.
Contact your Toyota dealer and explain what is occurring. If the alarm is being bypassed in that will be signs that the dealer can see/find.
Chances are the alarm is any not arming when you try to arm it or the sensitivity is set too low.
The dealer can show you how to arm it if to be exact the problem and can increase the sensitivity if you want it increased.
I hate to relate you this but you are finding out with even a factory alarm some one is breaking contained by.
My view is no thing what a person does. If some one wishes to break in and etc they will as you found out find a approach to do it.
Several suggestions for you. Have you tryed motion detector lights and what about those actual small camers.
Well, I think you requirement to get another alarm system. Perhaps they are disconnecting the battery-operated? Here's a real simple opinion, grease up the door handles, that will dirty their fingers and consequently go around the neighborhood and check everyone's door knob for grease. Or, you can pile up a bunch of tin cans merely inside the door... first do the grease trick to know which door they are using. Finally... if you know how often they are doing this, sleep contained by the van and surprise them!
More Auto Questions and Answers...
This article contents is post by this website user, AutoQnA.com doesn't promise its accuracy.