I have a 1990 ford ranger to be precise vibrating as I drive down the road, it will start to shudder pretty hard when I get about 25 mph. I hve check the tie rods, front pedals bearings, tires, and the u-joints on the drive shaft. Is within anything else I could check? Thanks for your help.
Answers: My 1993 Toyota did that when I first get it and it has a 4" heave kit installed. When I took it to a place that works on 4 X 4 vehicle they told me it could be just roughly speaking anything especially since I had the heave kit on it. But the guy said start next to the obvious entity first, which was the drive shaft. We took it sour the truck and took it in to find out if it be balanced, and sure ample it wasn't. They welded a immensity on it where it needed it and we put it stern on the truck. No more vibrations! Might want to do that. Hope I've helped a bit.
try helm balance or use the reverse tire tire to the front to check
More Auto Questions and Answers...
This article contents is post by this website user, AutoQnA.com doesn't promise its accuracy.