Whats the best place to hook a saloon amp to for power?

i tryed to hook them to the fuse but i cant get the wires on the fuse right to plug them contained by..can any one tell me how to hook them to the fuse or a better place?


Answers:    You want to hook it to a big ol relay near the mobile. You can use ignition 12 volts from the fuse panel to activate the relay. That'll preserve you from killing the freestyle if you leave the amp on.
You're contained by trouble, my friend. Your question kindly of shows that you don't have a clue what you're doing. I'm not dictum this to be mean, but you may want to want professional help beside this project.

Having said that - an amplifier needs to be connected DIRECTLY to the battery-operated through a dedicated fuse. Which fuse are you chitchat about?
connect it directly to the mobile but u need to put a fuse on the lead that connects to the battery its a special fuse that u can find at an auto zone the fuse is so that the amp wont suck adjectives the power out of the battery
ok first rotten you need a electrics kit if you bring that then it will come w/ detail instructions on how to install the amp properly it's the unforced answer that i can give you pluss the paraphernalia comes with everything that you involve to make the instalation
fuses do NOT prevent freestyle drain, they prevent fires.
YOu need wires of the correct type , size and current rating.
you inevitability an inline fuse
the fust must be as close to the battery as possible.

you should attain help , if you do not know how to do this assignment.
if you do it wrong , a fire.
if you do it wrong , your resale value is reduced because saloon looks hacked.
(first piece I look for is electrical hacking , especial after marketplace alarms )

try no to butcher the battery cable , putting it in . close to most do.
Which fuse? You mean the one that operate your air pouch?

Never connect the main power front of an amp to anything inside the cabin. Go straight to the freestyle or at least a crossroads box in the engine compartment that have a large evaluate connection put a bet on to the battery. This is sufficient for most smaller amps.
Uhhhh, I don`t know the BATTERY?!?
dude always alway and other connect the amp to battery direct thats why they hold switch and use 0 gage cable and if you have a CAP afterwards get a cable direct from the mobile into the cap and afterwards into the amp other then that power other from battery.
More Auto Questions and Answers...
  • How do i remove the in-dash cd player?
  • Shorted speakers?
  • TP Set on Volkswagen standard disc player - how the hell do I turn it stale??
  • What giving of power capacitor do I obligation for an Alpine 600w monoblock amp and a 12'' Alpine Type R Subwoofer?
  • Is This stereo too much or Do I requirement something else, Please Help?
  • What size ANL fuse should I install surrounded by my mobile fuse block and amp's fuse block?

    • This article contents is post by this website user, AutoQnA.com doesn't promise its accuracy.


    Copyright 2006-2008 AutoQnA.com All Rights Reserved.