1990 supra turbo subsequent mod?

i have a 1990 supra, lately upgraded the turbo from a ct26 to a ct40 and i need some imput on the subsequent mod. the car is bone stock except for the trial turbo and sound system and a alram system im more or less to put into it. i know that the head gaskets tend to be in motion out on them pretty fast and im already contained by the milage where they usually progress and im on a budget so im limited to how much i can do so from the roll what would be best?

metal head gasket
blow bad valve
turbo timer
boost controller
cat backbone exhaust
high flow cat

any other philosophy would be appreciated. oh i have just about 1000 but i need to win some all season tires cuz winter is coming up and im contained by colorado.

---

Answers:    You really need adjectives of the above if you want your turbo to work properly without hurting your engine!!
I would recommend a cat hindmost exhuast 1st to get some of the pressure out faster, and a blow rotten valve to sustain releive pressure on the turbo.
Next shortly after would be the head gasket, and finally the timers and controllers to facilitate make the turbo work at it's best.
You really should already enjoy at least the exhuast and blow stale valve, is the rest of the engine stock? There are closely of things you need to do to the engine when you increase PSI abundantly by upgrading turbo's.
Good Luck

---

More Auto Questions and Answers...

I newly replaced the axle shaft of my Toyota Camry v6 1997 model but something strage come up:?

When I remove my spark plug theres grease adjectives over it?

Car cuts out when I'm stopped at traffic lights?

Is it a special bulb i stipulation for an insepction light?

WHAT ARE THE SYMPTOMS OF SOMEONE NEEDING A NEW. VALVE COVER?please backing thnx?

I've get a 1990 Chevy Lumina 3.1 sedan that will not start. Engine turns, but no fire. Any minister to?

This article contents is post by this website user, AutoQnA.com doesn't promise its accuracy.