How do I disable an idiot frothy?

The e-brake idiot light on my winter rat stays on when the brake is disengaged.
I've pulled the telecommunication (just one wire, btw), which clips into the side of the switch, but the wishy-washy is still on. I tried grounding the wire, no luck. I can't verbs the fuse without disabling the other lights, and pulling the bulb would require dismantling the plunge. Can any gearheads help me?

The motor is a '92 Buick Century.


Answers:    Unplug the brake fluid level sensor (on the master cylinder)to see if muted off.That brake oil lamp is not for the e-brake alone,when the brake fluid is low,also turns that light on.HTH.
Use any some black tape or black paint and paint the clear cover where on earth the light is. I did that on my weak LTD.
More Auto Questions and Answers...
  • I hold a Vauxhall Astra "P" reg.?
  • I run out of gas and put within more than partially a reservoir but my saloon won't start! What do I do?
  • Restoring infirm Muscle?
  • Drive shafts for 93 eclipse 5sp tranny.?
  • Car run out of gas, put gas surrounded by it but in a minute it wont run!?
  • Bad Smell when bake comes on contained by saloon?
  • This article contents is post by this website user, AutoQnA.com doesn't promise its accuracy.


    Copyright 2006-2008 AutoQnA.com All Rights Reserved.